8
Make sure the oven is properly installed and plugged into the electrical.
OPERATIONS AND FUNCTIONS
1. Connect the mains lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
The glass tray must always be in place during cooking.
3. Close the door securely.
4. The oven door can be opened at any time during operation by pushing the door open button on the control panel.
The oven will automatically shut off. To restart the oven, close the door and then press the START button.
5. Each time a button is pressed. a BEEP will sound to acknowledge the press.
6. The oven automatically cooks on full power unless set to a lower power level.
7. The display will show “: 0” when press and hold ZERO ON button until display is turned on and beep sounds.
8. When the STOP/CLEAR button is pressed during the oven operation, the oven stops cooking and all information
retained.
To erase all information, press the STOP/CLEAR button once more. If the oven door is opened during the oven opera-
tion, all information is retained.
9. If the START button is pressed and the oven does not operate, check the area between the door and door is closed
securely. The oven will not start cooking under the door is completely closed or the program has been reset.
Wattage output chart
The power level is set by pressing the POWER button. The chart shows the display, the power level and the percentage of
power.
once
P-HI
100%
twice
P-90
90%
3 times
P-80
80%
4 times
P-70
70%
5 times
P-60
60%
6 times
P-50
50%
7 times
P-40
40%
8 times
P-30
30%
9 times
P-20
20%
10 times
P-10
10%
11 times
P-00
0%
Press Power button
Power level (Display)
Approximate Percentage of Power
