
8
OPERATIONS AND FUNCTIONS
1. Connect the main lead to an electrical outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray. The glass tray must always
be in place during cooking.
3. Close the door securely.
4. When the oven door is opened, the light turns off.
5. The oven door can be opened at any time during operation by touching the door release button on the control panel.
The oven will automatically shut off. To restart the oven, close the door and then press START button.
6. Each time a button is pressed, a BEEP will sound to acknowledge the touch.
7. The oven automatically cook on full power unless set to a lower power level.
8. The display will show : 0 when the oven is plugged in.
9. Time clock returns to the present time when the cooking time ends.
10. When the STOP/CLEAR buttion is pressed during the oven operation, the oven stops cooking and all information
retained.
To erase all information (except the present time), press the STOP/CLEAR button once more. If the oven door is opened
during the oven operation, all information is retained.
11. If the START buttion is pressed and the oven does not operate, check the area between the door and door seal for
obstructions and make sure the door is closed securely. The oven will not start cooking under the door is completely
closed or the program has been reset.
12. When using the PURIFICATION mode:
• Afer purify metal tablewares, take out them certainly. If not so, pressing other buttons it can be happened to spark.
• Do not use the glass tray for the PURIFICATION mode. Use the shelf only.
Wattage output chart
The power level is set by pressing the POWER/DEFROST button. The chart shows the display, the power level and
the percentage of power.
Make sure the oven is properly installed and plugged into the electrical outlet.
Press POWER/DEFROST
Power level(Display)
Approximate Percentage of Power
Once
P-HI
100%
Twice
P-80
80%
3 times
P-60
60%
4 times
P-40
40%
5 times
P-20
20%
Содержание KOR-637V0A
