Daewoo KOR-630A0S, Руководство по обслуживанию

Страница: 12 / 33

DISASSEMBLY AND ASSEMBLY
KO R-860A
1) Remove the gasket door from door weld AS.
2) Remove the barrier screen inner from door weld AS.
3) Remove the door frame from door weld AS.
4) Remove the stopper hinge top from door weld AS.
5) Remove the spring and the hook.
6) Remove the supporter barrier screen outer from door frame.
7) Remove the barrier screen outer from door frame.
8) Reverse the above steps for reassembly.
4. Method to reduce the gap between the door seal and the oven front surface.
1) To reduce gap located on part ‘A’.
•
Loosen a screw on stopper hinge top, and then push
the door to contact the door seal to oven front surface.
•
Tighten a screw.
2) To reduce gap located on part ‘B’.
•
Loosen two screws on stopper hinge under, and then push
the door to contact the door seal to oven front surface.
•
Tighten two screws.
REF. NO PART CO DE PAR T NAME DESCRIPTION Q’TY REMA RK
A01 3512204110 FR A M E D O O R A BS X R -401 H -2938 1
A02 3517003150 BA R R IER -S C R E E N *O A C R YL T 1.5 1
A03 3515304410 SU P P O R TE R B AR R -S *O P P 1
A04 3515204100 ST O P P E R H IN G E *T A S K O R -63150S 1
A05 3511705620 DO O R W E LD A S K O R -81250S 1
A06 3517002900 BA R R IER -S C R E E N *I P O LYE S T E R T 0.1 1
A07 3512300400 G A S K E T D O O R P P 1
A08 3513100700 HO O K P O M 1
A09 3515101300 SP R IN G H O O K P W 1 1
NOTE
A sm all gap m ay be acceptable if the m icrow ave leakage does not exceed 4m W /cm
2
.