9
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0” and a tone will sound. If the AC power
ever goes off, the display shows “ : 0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
touching the TIME SET PADS in
sequence.
4. Touch the CLOCK pad.
The display stops blinking, and the colon starts
blinking. If you selected 12 hour clock system, this
digital clock allows you to set from 1:00 to 12:59. If
you selected 24 hour clock system, this digital clock
allows you to set from 0:00 to 23:59.
NOTE: If you attempt to enter an incorrect time, the time will not be set and an error signal tone will sound.
Touch the CLOCK pad and re-enter the time.
When you touch the START pad, the DEF indicator starts blinking to show the oven is in the DEFROST mode. The display
counts down the time to show you how much defrosting time is left in the DEFROST mode.
The oven beeps during the defrosting cycle to signal that the food needs to be turned or rearranged. When the defrosting
time ends, you will hear 3 beeps.
NOTE : This oven has multiple clock systems. If
you want 12 hour clock system, omit this
step.
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating defrost and stand
times by cycling on and off.
1. Touch the DEFROST pad.
2. Touch the TIME SET PADS for the
desired defrosting time.
3. Touch the START pad.
The DEF indicator lights and “ : 0” is displayed.
The display will show what you touched.
Note : Your oven can be programmed for 99
minutes 99 seconds. ( 99 : 99 )
