Daewoo KOG-37671S, Руководство по обслуживанию, Страница: 9 / 32

DISASSEMBLY AND ASSEMBLY
Cautions to be observed when trouble shooting.
Unlike many other appliances, the microwave oven is high-voltage, high-current equipment.
It is completely safe during normal operation.
However, carelessness in servicing the oven can result in an electric shock or possible danger from a short circuit.
You are asked to observe the following precautions carefully.
1. Always remove the power plug from the outlet before servicing.
2. Use an insulated screwdriver and wear rubber gloves when servicing the high voltage side.
3. Discharge the high voltage capacitor before touching any oven components or wiring.
(1) Check the earthed.
Do not operate on a two-wire extension cord.
The microwave oven is designed to be used while earthed.
It is imperative, therefore, to makes sure it is earthed properly
before beginning repair work.
(2) Warning about the electric charge in the high voltage capacitor.
For about 30 seconds after the operation has stopped an electric
charge remains in the high voltage capacitor.
When replacing or checking parts, short between oven chassis and
the negative high terminal of the high voltage capacitor
by using a properly insulated screwdriver to discharge.
4. When the 15A fuse is blown due to the operation of the monitor
switch; replace primary interlock switch, secondary interlock
switch and interlock monitor switch.
5. After repair or replacement of parts, make sure that the screws are
properly tightened, and all electrical connections are tightened.
6. Do not operate without cabinet.
S ervice personnel should rem ove their w atches w henever w orking close to or replacing the m agnetron.
CAUTION
W hen servicing the appliance, take a care w hen touching or replacing high potential parts because of electrical shock
or exposing m icrow ave. These parts are as follow s - H V Transform er, M agnetron, H V C apacitor, H V Diode, H V F use.
WARNING