Daewoo KOC-972T0S, Руководство по обслуживанию

Страница: 2 / 53

SAFETY AND PRECAUTIONS ........................................................................................................... 2
SPECIFICATIONS ............................................................................................................................... 3
EXTERNAL VIEW................................................................................................................................ 4
1. OUTER DIMENSION..................................................................................................................... 4
2. FEATURE DIAGRAM ................................................................................................................... 5
INSTALLATION ................................................................................................................................... 7
EARTHING INSTRUCTIONS............................................................................................................... 7
CONTROL PANEL .............................................................................................................................. 8
DISASSEMBLY AND ASSEMBLY...................................................................................................... 9
INTERLOCK MECHANISM AND ADJUSTMENT............................................................................... 23
TROUBLE SHOOTING GUIDE ........................................................................................................... 24
MEASUREMENT AND TEST .............................................................................................................. 30
1. MEASUREMENT OF THE MICROWAVE POWER OUTPUT ...................................................... 30
2. ELECTRICAL CONTINUITY CHECK OF INTERLOCK SWITCH................................................. 31
3. MICROWAVE RADIATION TEST ................................................................................................. 32
4. COMPONENT TEST PROCEDURE ............................................................................................. 33
WIRING DIAGRAM.............................................................................................................................. 34
SCHEMATIC DIAGRAM...................................................................................................................... 35
EXPLODED VIEWS AND PARTS LIST .............................................................................................. 38
PRINTED WIRING BOARD ................................................................................................................. 44
P.C.B. CIRCUIT DIAGRAM ................................................................................................................. 49
(a) Do not operate or allow the oven to be operated w ith the door open.
(b) M ake the following safety checks on all ovens to be serviced before activating the m agnetron or other m icrowave
source, and m ake repairs as necessary: (1) Interlock operation, (2) Proper door closing, (3) Seal and sealing
surfaces (arcing, wear, and other dam age), (4) Dam age to or loosening of hinges and latches, (5) Evidence of
dropping or abuse.
(c) Before turning on power to the m icrow ave oven for any service test or inspection within the m icrowave
generating com partm ents, check the m agnetron, wave guide or transm ission line, and cavity for proper
alignm ent, integrity, and connections.
(d) Any defective or m isadjusted com ponents in the interlock, m onitor, door seal, and m icrowave generation and
transm ission system s shall be repaired, replaced, or adjusted by procedures described in this m anual before the
oven is released to the owner.
(e) A m icrowave leakage check to verify com pliance with the Federal perform ance standard should be perform ed on
each oven prior to release to the owner.
PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE
EXPOSURE TO EXCESSIVE MICROWAVE ENERGY