10
IMPORTANT
–
RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
White Convector Heater with Turbo, Timer & LCD
Model No. HEA1812
User Manual
Using the Frost Protection
This heater has a frost protection mode whereby the heater can be set to come
on should the temperature drop to 5⁰C (41⁰C) or lower.
The heater will switch off
if the temperature rises to 9⁰C.
1.
To enable the Frost Protection mode, press the
On/Off Standby
button (19)
and then press the
Power Level
button (16) until the
Frost Protection Symbol
(14) is shown on the
LCD Display
(3).
Using the Turbo Fan
Press the
Fan Button
(20) to enable the Turbo Fan, to boost heating. The air will
be blown out of the Air Outlet (6).
For cool air, first
press the
On/Off Standby
button (19) to power up the heater,
then press the
Fan Button
(20).
Using the Remote Control
The Remote Control duplicates the controls on the control panel allowing you to
control your convector heater remotely.
If using the Remote Control for the first time, pull
the tab from the battery compartment as shown
right:
Replacing the Battery in the Remote Control
If the Remote-Control range has become reduced or it has stopped working
altogether the battery will need replacing as shown below:
A
Push the tab on the
battery compartment in
the direction of the arrow
as shown above.
B
Slide out the battery
compartment and insert a new
CR2032 battery
ensuring the
positive polarity marking is
uppermost.
C
Slide the battery
compartment back into
the Remote Control
.
