Daewoo HEA1139 Скачать руководство пользователя страница 5

Operating Instructions 

– heat setting 

 

  Place the heater on a solid, level non-flammable surface in either the 

vertical or horizontal position (see above). 

  Ensure that the On/Off/Fan/Heat Switch (2) is in the off (O) position 

  Insert the mains plug into the mains socket. 

  For the low heat setting, rotate the On/Off/Fan/Heat Switch (2) to the low 

heat position (I). 

  For the high heat setting, rotate the On/Off/Fan/Heat Switch (2) to the high 

heat position (II). 

  Rotate the thermostat control (3) clockwise to increase the room 

temperature and anticlockwise to decrease the room temperature as 
desired. 

NB

 the Indicator (4) will illuminate on and off to indicate that the set 

temperature is being maintained. 

  Return the On/Off/Fan/Heat switch (2) to the

 

(O) position to switch off the 

heater. 

 

Hint on setting the correct temperature 
 

  Set the heater to the desired heat setting as above. 

  Rotate the Thermostat to the maximum position and allow the room to 

warm up. Once the desired room temperature has been reached turn the 
Thermostat anticlockwise until the heater just clicks off then turn it back up 
clockwise very slightly. The Thermostat will now maintain the room 
temperature, if necessary, further increasing or decreasing the thermostat 
control may be required to ‘fine tune’ the ideal room temperature. 

  Return the on/off/fan/heat switch (2) to the

 

(O) position to switch off the 

heater. 

 

Fan Only Mode

 

 

  Rotate the On/Off/Fan/Heat Switch (2) to the fan only position ( ) to 

enable the fan to operate for cool air output. 

NB

 the thermostat control will 

need to be rotated to the fully clockwise position for the fan to operate. 

 

Care and Use of your Fan Heater 

 

 

Always disconnect the heater from the mains power supply and allow to 
cool before cleaning. 

 

Clean outside of the heater with a clean damp cloth. Never clean with 

harsh or abrasive cleaners. 

 

Do not submerge any part of the heater in water or any other liquids.  

Содержание HEA1139










Отзывы: