For your own safety read the following instructions carefully before attempting to
connect this unit to mains.
4
I n i t i a l
INSTALLATION
Moulded plugs
Should it be necessary to remove a moulded on plug from the mains cable, it
should be cut off and replaced with a suitable replacement.
If the terminals in the plug are unmarked or you are in any doubt as to the correct
connections, consult a qualified electrician.
The wires in this mains lead are coloured in accordance with the following
code
Blue
Neutral
Brown
Live
As the colour of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
replacement plug proceed as follows.
The wire which is coloured blue must be connected to the terminal which is
marked with letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with letter L or coloured red.
The moulded plug cannot be used for any other appliance, therefore remove
the fuse and dispose immediately and safely to prevent anyone, especially
children from plugging it in to a wall socket, which will create a safety
hazard.
After replacement of the fuse in the moulded plug, the fuse cover must be
refitted. If the fuse cover is lost a replacement cover must be obtained. The
colour of the correct replacement fuse cover is that of the coloured insert in
the base of the plug or the colour that is embossed in words in the base of
the plug recess or elsewhere on the plug. Always state this colour when
ordering a replacement fuse cover.
Only 5 amp. replacement fuses which are ASTA approved to BS 1362 should
be fitted.
(U.K. Only)
We recommend the use of a good quality plug.
