Daewoo G420E, Руководство по обслуживанию

Страница: 72 / 88

G420E/G424E
Tier
LP Engine N-CA55-500TR Mixer 71
N-CA55-500TR Mixer
Removal Steps:
1. Close the liquid outlet valve in the forklift cylinder
or fuel storage container.
2. Purge the system of fuel by starting the engine
and running until all trapped fuel in the system is
exhausted and the engine shuts down.
3. Remove the air horn air inlet adapter and hose
(Figure M1-1).
4. Mark the two vacuum lines to the mixer and
throttle adapter for identification; they must be
installed correctly for proper operation. Remove
the two vacuum lines (Figure M1-2).
5. Remove the vapor fuel inlet line (Figure M1-3).
6. Remove the electronic throttle connector (Figure
M1-4).
7. Remove the four bolts that mount the throttle
adapter to the electronic throttle body (Figure M2-
5).
8. Remove the mixer/adapter assembly from the
throttle by gently pulling upwards.
NOTE
There will be a plastic o-ring spacer and
an o-ring inside this adapter, be careful
not to lose these items when removing
the mixer/adapter assembly from the
throttle (Figure M3).
Figure M3
O-Ring
Spacer
Figure M3
Figure M2
1
3
4
2
5