Daewoo FN-510DW Series, Руководство по обслуживанию

Страница: 21 / 31

7-2. Temperature Control of Refrigerator Compartment
INPUT CONTROL OBJECT
●
PCB Control Panel “TEMP” Buttons
●
R-sensor
●
PCB Control Panel LED
●
COMPRESSOR, FAN
A. “TEMP UP, DOWN” Button
ⓐ
Temperature control of Refrigerator compartment
ⓑ 5 step mode of successive temperature mode
ⓒ
Initial mode by power input: step “3”
ⓒ
Initial mode by power input: step 3
ⓓ
Temperature will be set if the button doesn’t get pressed again within 5 sec.
※ Whenever pressing “UP” button, setting is repeated in the order of
“1” → “2” → “3” → “4” → “5” (LED LAMP ON)
※
Whenever pressing “DOWN” button, setting is repeated in the order of
“5” → “4” → “3” → “2” → “1” (LED LAMP ON)
B. Temperature of Refrigerator Control
ⓐ
COMP and FAN will be controlled by the on/off condition of each mode.
ⓑ
Temperature Difference of Refrigerator each step :
ⓑ
Temperature Difference of Refrigerator each step :
ⓒ
Temperature of Refrigerator
at step “3” OFF point: 1.8
°
C
ⓓ Refrigerator ON/OFF Temp
Temperature Step “1” “2” “3” “4” “5”
Temp. Diff. of Each Step 1.0
°
C 1.0
°
C 1.0
°
C 1.0
°
C
ⓓ Refrigerator ON/OFF Temp.
Difference: 0.7
°
C
C. “S-COOL” MODE
ⓐ Press S-COOL SWITCH
and make S-COOL led lamp on.
ⓒ
COMP & FAN are on until R-sensor
reaches to “Over Refrigeration
3.8
°
C
2.8
°
C
4.5
°
C
3.5
°
C
2.5
°
C
OFF Point”, -7
°
C
ⓓ
After the reach of -7
°
C , STEP “5” mode continues.
ⓑ When “S-COOL” MODE (Quick Refrigeration Mode)
lasts for about 40 minutes, it returns to general
operation mode.
D. Temperature of Freezer Control
-It will be only controlled by using
1.8
°
C
0.8
°
C
0.5
°
C
1.5
°
C
OFF
“KNOB F LOUVER” in Freezer.
STEP “1” “2” “3” “4” “5”
-0.2
°
C
ON
20