Once all parts are thoroughly dry, reassemble
the cylinder.
Place the HEPA filter back into the filter
assembly and re-attach the filter assembly to
the cylinder lid.
Ensure all parts click back into place by
aligning the arrow on the filter assembly with
the open padlock symbol on the lid then
turning in the direction of the closed padlock
Rectangular HEPA filter
To access the rectangular HEPA filter, remove the cylinder as described.
The rectangular filter is located in the body of the vacuum cleaner behind
the cylinder.
To remove the filter from the vacuum
cleaner body, press down on the catch
at the top of the filter and pull the filter
towards you.
Tap the filter over a dustbin to remove
any excess dust and debris then rinse
under warm water until the water runs
clear.
Leave to dry for 24 hours before
refitting to the vacuum cleaner.
Tornado F1 Upright Vacuum
FLR00049
User Manual
