background image

11

Time Lapse Video Cassette Recorder

6

Press the SET - (or +) button to set the minutes (eg
: 30), then press the SHIFT

button.

7

The seconds are already set to “00”.

8

Press the SHIFT

button.

9

Press the SET - (or +) button to set the month (eg :
04), then press the SHIFT

button.

10 Press the SET - (or +) button to set the day  (eg :

12), then press the SHIFT

button.

11 Press the SET - (or +) button to set the year (eg : 04

for 2004).

• The last 2 digits only are displayed.
• The day of the week is set automatically.

12 Press the MENU button three times, the normal

screen is displayed.

•  The setting procedure is now complete.

10

Time Lapse Video Cassette Recorder

Setting the Clock

Example: To set the clock to April 12, 2004 at 9:30

Clock Setting

1

Turn the power on to all devices used.

2

Press the MENU button, the initial MENU is displayed.
The arrow mark (

) is located in “VCR Mode Set”.

 Initial MENU

3

Press the SHIFT

button, the VCR MODE SET menu

is displayed.  The arrow mark (

) is located in

“Clock Set”.

4

Press the SHIFT

button, the CLOCK SET menu  is

displayed.

5

Press the SET - (or +) button to set the hours (eg :
09), then press the SHIFT

button.

Содержание EV-VCR024R



























Отзывы: