6
Emerald 2 Slice Toaster
Model No. SDA2287
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description of Parts
Operating Instructions
Toasting
Place the toaster on a solid, level non-flammable
surface.
Insert the mains plug (with dry hands) into the
mains socket and switch on (if applicable).
Place the slices of bread into the Bread Slots (7).
Select the desired browning level using the
Browning Control (5). Rotate the control clockwise
to increase browning and anticlockwise to
decrease browning.
Push the Bread Carriage Lever (1) down to begin toasting, the lever will lock down
and then pop up once the toasting is complete.
If you wish to cancel the toasting at any time, simply press the Cancel Button (2).
DO NOT insert bread slices that are too thick for the Bread Slots, always ensure that the
Carriage Lever is free to move up and down.
DO NOT operate the Toaster with the Crumb Tray (6) removed.
Reheat Feature
This feature is used for reheating toast that has
previously been made but has gone cold.
Place the slices of toast into the Bread Slots (7), push
the Bread Carriage Lever (1) down then immediately
press the Reheat Button (3 – arrowed right). The
Bread Carriage Lever (1) will pop up once the reheat
cycle has completed.
If you wish to cancel the reheating mode at any time,
simply press the Cancel Button (2).
1.
Bread Carriage Lever
2.
Cancel Button
3.
Re-Heat Button
4.
Defrost Button
5.
Browning Control
6.
Crumb Tray (rear)
7.
Bread Slots
1
2
3
4
5
6
7
