4
DIRECTIONS FOR SAFE USE
HOW TO INSTALL
Location
Place your washer on a level and solid floor,
Considering the length of inlet hose, drain
hose and power supply cord.
Do not place or store your washer below 0˚C(32˚F) to avoid
any damage from freezing.
Do not place your washer where it may be splashed during
bathing.
Installation of the Under Base Cover(Option)
After installing the washing machine,
assemble the under-base cover.
If washer is not level, it should be corrected by
the adjustable leg (provided optionally) in the
front-right side under the base and/or, a thin
block or brick.
NOTES:
The opening muse not be obstructed by carpeting
when the washing machine is installed on a
carpeted floor.
1
Before installing your washer, remove the
pad from the bottom of the cabinet. Then,
separate under cover from rear side of
cabinet by unscrewing and insert it into the
base.
2
Push the under-base cover into the end,
which decrease the noise made by this
washer.
SCREW
1
After the packing box is opened, there is a
under-base cover at the top of the washer.
2
Push the under-base cover into the end,
which decrease the noise made by this
washer.
DWF-800MP(¿ )
01.3.26
9:57
PM
˘
`
4