14
HOW TO INSTALL OF THE WASHING MACHINE
SELECTION OF THE INSTALLING PLACE
IN CASE THAT THE WASHER IS INCLINED
• Choose a place on a horizontal
solid floor. When the washer is
installed on unstable floor, it
makes noise and vibration.
• Don't choose a floor where direct
rays of the sun.
Because the washing machine's
color becomes different.
• Avoid installing it in a place where
it can be exposed to rain that may
cause it rust and leak.
• Coal gas may cause corrosin.
• Don't install in the place where it is
anxious about being frozen in
winter.
* NOTE
The opening must not be
obstructed by carpeting when the
washing machine is installed on a
carpeted floor.
4. INSTALLATION INSTRUCTIONS
ƒU
Insert the ‘height adjust rubber’ to
the inclinded direction. It can be
adjusted as far as 30mm.
ƒU
Control the height by turning the
adjusting leg. After that turn the
outer cap to be locked.
• Don't turn the adjusting leg to be
separate.
ƒU
Check the position at the front
center of the washer.
Height
Adjust
Rubber
Lock
Loose
¡
Insert the Height
Adjust Rubber
™
Height Setting
£
Check the Horizon
When the washer is installed on an unsuitable floor, it makes noise
and vibration and occures out of order.