Daewoo DWF-4220 Series, Руководство по обслуживанию

Страница: 27 / 57

26
No. of times
to press Check DISPLAY Items The condition of
button Mode being checked normal operation
'Water Level'
NOTE:
• If pressing 'PROCESS' button within 10 seconds, the check mode changes to 'B', 'C' and 'D' mode.
• If 'PROCESS' button is not pressed, 'A' mode will run.
HOW TO OPERATE TEST MODE
1. Turn off the power.
2. Keep pressing two buttons ('WATER LEVEL', 'COURSE'.) together and press the power switch.
3. Remove your fingers on the two buttons.
4. Press the 'WATER LEVEL' button according to desired check mode.
5. It is possible to stop operation temporarily by pressing 'START/HOLD' button.
TEST MODE
The operation condition of the washer can be checked without water in the tub by test mode of the P.C.B. ASS'Y as
shown below.
• Buzzer sound
indicating the end
of washing
• L.E.D lamp
• The condition of
wash process
(Motor)
• The functional
condition of whole
operating
• Aging Mode for
P.C.B. ASS'Y
• The buzzer sound
8 times while the
indicator lights
blinks
• The pulsator
rotates
continuously
without water in
the tub
• The washer
repeates following
operating
Drain
¤A
Spin
¤A
Cold Water
¤A
Hot
Water
¤A
Pulsator
rotate (right)
¤A
Bubble
¤A
Pulsator
rotate (left)
¤A
Pump
¤ADoor check
¤AINITIAL STATE
• C Mode runs
continously
without INITIAL
STATE
0 A
1 B
2 C
3 D
§ § § § § § § § § § § § § §
ƒo ƒo ƒo ƒo ƒo ƒo ƒo § ƒo ƒo ƒo § ƒo ƒo
ƒo ƒo ƒo ƒo ƒo ƒo ƒo § ƒo ƒo ƒo § § §
ƒo ƒo ƒo ƒo ƒo ƒo ƒo § ƒo ƒo ƒo § § §