background image

6

CONVENIENCE

HOW TO CLEAN THE FILTER

4

Remove the dirt
from the inlet filter
with a brush.

1

Pull the 
power plug
out before
cleaning it.

2

Turn off the
water supply 
to the washer
and sperate the
inlet hose.

3

Pull the 
inlet filter out.

CLEANING THE LINT FILTER

CLEANING THE WATER INLET FILTER

• Clean the filter when water leaks from, the water inlet.

CLEANING THE DRAIN FILTER

• In case “U” shape drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused. 

3

Return the filter as it was, and
insert the filter frame into the
slot.

1

Pull the Filter frame
upward.

2

Turn the lint filter
inside out, wash to
the lint off with water.

1

Put down the 
remained water in the 
hose. And put a container
under the filter to collect
water.

2

Turn the cap counter
clockwise.

3

Pull out the filter assembly off
the case of the main body.

6

Turn the cap clockwise tightly.

4

Clean the drain filter
removing the foreign
stuffs.

5

Put in the filter along the 
guiding prominence of the
case. Please note the left
position of the filter adjusting
the groove to the guide rib.

Lint Filter

Filter Frame

FILTER

FILTER

FILTER

CAP

CAP

CAP

CAP

SLIT

CASE

CONTAINER

FILTER

CAP

CASE

SUIT

GUIDE
RIB

Содержание DWF-301AW







































Отзывы: