background image

4. FEATURE AND TECHNICAL EXPLANATION

7

FEATURE

WASH          DRAIN       SPIN         FILL        RINSE 1          DRAIN     SPIN      FILL        RINSE 2         DRAIN     •••

MOTOR     

C.W

SINGAL         C.C.W

TIME(SEC.)  

0.3

0.3

0.3

0.3

0.3

0.3

• • • • • • •

35 SEC. (About 29 Times)

Feature of the Washing Machine

1

First applying the Radical Technology in the world ... go beyond washing, sterilize your colthes and deodorize a
bad smell.

2

The first air bubble washing system in the world.

3

Quiet washing through the innovational low-noise design.

4

Improving washing performance by more than 35%, while reducing power consumption by 40%.

5

The laundry detergent dissolves well in water because of the air bubble washing system.

6

The adoption of the water currents to adjust the unbalanced load.

7

One-touch operation system.

Water Current to Adjust the Unbalanced Load

It is a function to prevent eccentricity of the clothes after wash by rotating pulsator C.W and C.C.W for 35
seconds.(But, the SUIT course have no operation of the water currents to adjust the unbalnced load.)

EFFECT
It reduces vibration and noise effectively while spinning.

WATER FLOW

Automatic Water Supply System For Blanket Wash

The water level would be lowered because the blanket absorbs water at the beginning of washing. Therefore, after
2 minutes, the operation is interrupted to check the water level, and then the water is supplied again until the select-
ed water level is reached.

Содержание DWF-200M(V)















































Отзывы: