22
23
Maintenance
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door tightly to avoid
pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the washings.
Clean the filter periodically to ensure the normal operation of washing machine
.
Trou bles
Reason
Solution
Washin g mach ine
can not start up
Check if the d oor is closed tig htly.
Check if po wer plug is ins erte d well.
Chec k if water sup ply tap is opened.
Chec k if button “START/PAUS E” is pressed.
Door cannot be
opened
Heating fau lt
Water lea kage
Water i s
overflowed fro m
the bott om of the
machin e
Indic ator or
display does
not light.
Deterg ent
residues i n the
box
Washi ng eff ects
are not good
Abn ormal n oise
Great vibratio n
The cloth es ar e too dirty.
Insuffici ent detergent qu antity.
Washing powder is dampened
and a gglom erate d.
Power is disco nnected.
PC board has pr oblems.
Harness h as connection
probl em.
The inlet pipe is not co nnec ted
firml y.
Outle t hose has water leaka ge.
NTC is d ama ged and heati ng
pipe is aging.
Machine's safety p rotectio n
design is working.
The connec tion between in let
pipe or o utlet hose and ta p or
washing machine is not tig ht.
Drain pi pe in t he roo m is blo cked.
Dis conn ect the power.
Can n ormally wash th e clo thes.
Only c annot wash with heat ing.
Shall conta ct the ser vice center promptly.
Check and fasten water p ipes.
Clean up outlet hos e and ask a
specialized person t o repair i t when
necessary .
Fix the inlet pipe.
Replac e the drain hose .
Chec k if the power is shut down a nd
pow er plug is con nected correctl y.
If not, ple ase c all up service li ne.
Clean and w ipe the box.
Use liq uid deter gents or th e deterge nts
specia l for dr um.
Select a proper procedure .
Add the proper d eterg ent quant ity
acc ording to the instructions in
dete rgent packa ge.
Check if the fi xing (bolts) has be en remo ved.
If cabinet is installed o n the sol id and level
floor.
Check if the re are a ny barrette s or me tal
articles insi de.
Che ck if the legs i n the washi ng mach ine
are a djusted le vel. Se e page 6.
Troubleshooting
According to the soil level within the cycles and the frequency of the cycles,
clean the filter regularly.
you have to inspect and
Close the service panel
Open the service panel
Unscrew the pump cover
Screw the pump cover
The pump should be inspected if the machine does not empty and/or spin;
The machine makes an unusual noise during draining due to objects such as safety pins,coins
etc.blocking the pump.
1. Disconnect the appliance;
2. If necessary wait until the water has cooled down.
3. Open the service panel .Place a container close to collect any spillage.
4. When no more water comes out, unscrew the pump cover and remove it.Always keep a rag
nearby to dry up spillage of water when removing the cover.
5. Remove any objects from the pump impeller by rotating it.
6. Screw the pump cover fully in.
7. Close the service panel.
Waring!
When the appliance is in use and depending on the programme selected there can be hot water
in the pump. Never remove the pump cover during a wash cycle, always waituntil the appliance
has finished the cycle, and is empty. When replacing the cover, ensureit is securely retightend so
as to stop leaks and young children being able to remove it.
The Service_panel proceed as follows(applicable to
:
6.0/7.0kg)
Содержание DWD-NT1211SC
Страница 1: ......
