Daewoo DWD-MI Series, Инструкция по эксплуатации

Страница: 10 / 31

10
N.b. Do not use extension cords or
adapters.
Figure 8
The manufacturer disclaims any liability
for damage or injury caused by noncompli-
ance with our safety rules
IMPORTANT!
• AFTER HAVING INSTALLED THE
APPLIANCE, THE POWER CORD
MUST BE ACCESSIBLE
• IF THE POWER CORD IS DAM-
AGED, IT MUST BE SUBSTITUT-
ED BY THE MANUFACTURE, ITS
QUALIFIED TECHNICIAN WITH
AIM OF AVOIDING DANGER
Make sure the plug is always accessible to
unplug the machine from the mains.
The electrical power system must be designed
according to VDE 0100.
It is recommend to not connect in any case
the machine with extension cords multiple
power sockets, etc to avoid overheating
To increase security VDE, in the directive DIN
VDE 0100 in section 739, it is recommended
to install a circuit breaker (RCD) with a tripping
current of 30 mA (DIN VDE 0664).
If using a differential circuit breaker, make sure
it is type A, according to DIN VDE 0664 and
current sensitive buttons.
The rating plate provides information on rated
current absorption and relating protection.
Compare these data with the power supply.
DWD-M_DWD-FI.indd 10 2015-05-27 오전 10:39:08