Daewoo DWD-M8051, Руководство по обслуживанию, Страница: 12 / 29

11 DIRECTION FOR DISASSEMBLY
UNIVERSAL MOTOR
1
Separate the box inlet as from the washer.
(Remove screws and hose inlet)
2
Remove the screw of the motor connector.
And separate the connector from the tub.
Firstly, you have to do from
1
to
5
of HEATER AND THERMISTOR DISASSEMBLY.
3
Separate the hose air from the sensor pressure.
4
Lay the front-side of washer on the floor.
And remove four screws.
5
Separate two dampers and the hose drain.
6
Lift up the cabinet as.
7
Separate the belt.
8
Remove two screws from the motor and remove the
screw from the drum using a box wrench.