|
9
|
Installation
Refer to the installation guide for installation.
(see "installation guide" on page 25~27)
The washer is recommended to be installed by a professional
service engineer.
1
2
Preparation
- This washer is available for use with cold water only.
Do not connect the inlet hose to the hot water tap.
Caution
Connect the drain hose to the drain.
- Check that the drain hose is tightly connected.
- A minor water leak may occur during installation or the initial cycle. The leak is
caused not by a malfunction or a mechanical problem but by the remnant for
functional test performed at the manufacturing plant.
1
Connect the inlet hose and turn on the tap.
- Check whether any leaks occur around the hose guide or inlet hose connection.
2
- Check the grounding procedure to prevent electric shocks.
Plug in the power cord.
3
D-M301WP_INTENSIVE_호주향.indd 10
2014-02-03 오후 4:18:31