background image

60

TROUBLESHOOTING GUIDE

MESSAGE

ERROR

CAUSE

SOLUTION

The water tap is closed.

Open the water tap.

The filter of the valve inlet is clogged.

Clean the filter of the valve inlet.

The valve inlet is an inferior product or broke down.

Change the valve inlet.

The water level sensor (sensor pressure) is an inferior product 

Change the water level sensor 

or broke down.

(sensor pressure). 

The drain motor works during water supply.

Change the drain motor.

The PCB ASS’Y does not check the water level.

Change the PCB ASS’Y.

The drain hose is kinked or clogged.

Clean and straighten the drain hose.

The drain motor is an inferior product.

Change the drain motor.

The valve inlet works during drain.

Change the valve inlet.

The water level sensor is an inferior product.

Change the water level sensor. 

The PCB ASS’Y does not check the water level.

Change the PCB ASS’Y.

The laundry is concentrated to one side of the drum during spin.

Rearrange the laundry.

The Start/Pause button is pressed while the door is opened.

Close the door.

The switch door lock is an inferior product.

Change the switch door lock.

The PCB ASS’Y does not check the door lock.

Change the PCB ASS’Y.

The water is supplied continuously due to an inferior valve inlet.

Change the valve inlet.

The valve inlet is normal, but the water level sensor

Change the water level sensor 

(sensor pressure) is inferior.

(sensor pressure). 

The drain motor does not work. 

Change the drain motor.

(The drain motor is an inferior product or broke down.)

Water leaks from the tub or the hose drain.

Check the leak of the tub or the hose drain.

Then change the tub or the hose drain. 

The laundry is jammed between the gasket and the drum.

Rearrange the laundry.

The PCB ASS’Y is an inferior product.

Change the PCB ASS’Y.

The laundry is jammed between the gasket and the drum.

Rearrange the laundry.

The motor is an inferior product.

Change the motor.

The PCB ASS’Y is an inferior product.

Change the PCB ASS’Y.

The motor is not normally connected.  

Check the connector of the motor.

The motor does not work.

Change the motor.

(The motor is an inferior product or broke down.)

The water level sensor is an inferior product.

Change the water level sensor.

The thermistor wash is an inferior product or broke down.

Change the thermistor wash.

The thermistor wash is not connected normally.

Check the connector of the thermistor wash.

The heater worked without the water in the tub.

Check the water level.

The thermistor wash is an inferior product or broke down.

Change the thermistor wash.

WATER INLET 

ERROR

DRAIN 

ERROR

UNBALANCE

ERROR

DOOR OPEN 

ERROR

OVERFLOW

ERROR

LEAKAGE

ERROR

HIGH VOLTAGE

ERROR

EMG ERROR

MOTOR

ERROR

SENSOR

PRESSURE ERROR

THERMISTOR

WASH ERROR

THERMISTOR

WASH 

OVERHEATING

ERROR

IE

OE

UE

LE

E2

E4

E5

E6

E8

E9

H2

H4

Содержание DWD-F1011


































































Отзывы: