Daewoo DWD-F101(1~3), Руководство пользователя

Страница: 29 / 33

29 TROUBLESHOOTING GUIDE
MESSAGE CAUSE SOLUTION
Open the water tap
Clean the filter of the water inlet.
Change the water level sensor.
Clean and straighten the drain hose.
Change the drain motor.
Rearange wash loads to allow proper spin.
Colse the door.
Change the lock switch.
Change the water inlet valve.
Change the water level sensor.
Change the water level sensor.
Change the PCB ASS'Y.
Arrange the laundry.
Change the motor.
Change the PCB ASS'Y.
Change the PCB ASS'Y.
Clean the drain filter.
Change the water thermistor.
Check the contact part of the connector.
Check the water level.
Change the water thermistor.
Change the water thermistor.
Change the heater.
Check the water level.
The water tap is closed.
The filter of the water inlet is clogged.
The water inlet vlave is normal, but the water level
sensor is inferior.
The drain hose is kinked or clogged.
The drain motor is inferior.
Wash loads get uneven during spin.
While the door is opened, the Start/Hold( ) button is
preesed.
The lock switch is inferior.
Water overfill due to faulty water inlet valve.
The water inlet vlave is normal, but the water level
sensor is inferior.
The water level sensor is inferior.
The PCB ASS'Y is inferior. (the error of over electric current)
The laundry inserted between the gasket and the drum.
The motor is inferior.
The PCB ASS'Y is inferior. (the error of EMG)
The PCB ASS'Y is inferior.
(the error of IGBT)
The drain filter is clogged.
The wash thermistor is inferior.
The contact part is disconnected.
The heater works without water in the drum.
The wash thermistor is inferior.
The water temperatue is over 45°C in the wool course.
The heater doesn't work.
The heater works without water in the drum.