Daewoo DWB-180RH-R, Руководство по обслуживанию

Страница: 15 / 44

14
FUNCTION
ON TIMER
Push the ‘TIMER/CANCEL’ button
when unit is off. (REMOCON ONLY)
SLEEP MODE
Push the ‘SLEEP’ button in
‘COOLING’ mode and HEATING
MODE. (REMOCON ONLY)
Defrost the heat-exchanger of the
outside (in heating mode)
OPERATION
1. Timer is changed to as follows by pushing
“TIMER/CANCEL” button.
(1hr
→
2hr
→
3hr
→
4hr
→
5hr
→
6hr
→
8hr
→
10hr
→
12hr
→
16hr
→
20hr
→
24hr
→
cancel)
2. The unit starts working after set time is
over. (by the operation mode and last
setting temperature before the unit is off.)
3. If you want to cancel timer, push this
button again at any time.
1. SLEEP MODE is changed as follows by
pushing “SLEEP” button.
(L1
→
L2
→
Cancel)
* L1 Mode
– The unit is off after 4 hours.
– The desired Temp is increased 3°C
(5.4°F) for 4 hours in Cooling mode.
– The desired temp is decreased 3°C
(5.4°F) for 4 hours in heating mode.
– Auto swing is selected.
– Fan speed is set to ‘LOW’.
* L2 Mode
– The unit work; as follow
– Auto swing is selected.
– Fan speed is set to ‘LOW’.
2. This mode can be selected in ‘COOLING’
and ‘HEATING’ mode only.
The unit runs 50 minutes
The unit will start defrost function when the
temperature of the heat exchanger of the
outside arrived at the programed
temperature. If not arrived at the programed
temperature, the unit continuousiy runs the
heating mode.
While the defrost function is working the unit
runs cooling cycle but the fan stops.
DISPLAY
1. ‘TIMER’ lamp lights.
2. Setting time is displayed.
3. After a few seconds, display is changed
to current room temperature.
1. ‘L1’ or ‘L2’ is displayed.
no display
FAN
HEATING
COOLING
ROOM TEMP
DESIRED TEMP
TIMER
TIMER/
CANCEL
SLEEP
• ROOM TEMPERATURE DISPLAY.
Over 45°C or 100°F
5°C~45°C or 41°F~99°F
Below 5°C (41°F)
DISPLAY TEMPERATURE