7. HOW TO INSTALL THE DRAIN CAP
Install the drain cap like Fig. of the right side.
There are two kinds of method to install the drain cap.
The first method is that the shape of hole like
It is good for the household.
The second method is that the shape of hole is like
It is good for the shop.
8. Remain or Remove the ‘CAP BASE’
Iocated on the bottom of BASE as follows.
9. Reinstall the unit, side screws, front grille.
The rear side of the unit
Drain Cap
SEAL DRAIN
M4x8 SCREW: Use Screw(M4x8) only.
6
CAUTION
• When the front grille is reinstalled, the DOOR VENT should be in position first so that it would not
be bent by grille.
Door Vent
General
Using mode
CAP BASE
Cooling &
heating
Remove
Cooling
only
Attach
Heating
Remove
CAUTION : You must remove the ‘CAP BASE’ when you operate in heating mode.
