Daewoo DW-5010, Руководство по обслуживанию

Страница: 11 / 21

10 TROUBLE SHOOTING
PROBLEM CHECK POINT CAUSE SOLUTION
Is the wash load well
balanced?
Spin Dryer does not bal-
anced due to wash load.
Reload the clothes so
they are well balanced.
NO
YES
Is The Spin Dryer itself
well Balanced?
Spin Dryer unbalance Re-assemble Spin Dryer.
The Waterseal or the
Oilless metal in the Bellows
Assembly worn out.
Replace Bellows Assembly
NO
YES
Are clothes or the Safely
Cover stuck out of the
Spin Basket?
Tub is in contact with the
object stuck out.
Reload the clothes and
press down the Safety
Cover into Spin Basket.
YES
NO
Is the assembly
between the Drum
Coupling Assembly and
Spin Motor or Spin
Dryer loose?
Improper structural
assembly
Tighten the Bolt in Drum
Coupling Assembly
YES
NO
THERE ARE
STRANGE
NOISE AND
SEVERE
VIBRATION
DURING
SPINNING.
Is the Bellows Assembly
properly assembled?
Waterproofing not working
due to defective assembly.
Re-assemble Bellows
Assembly.
NO
YES
THERE IS
LEAKAGE
DURING SPIN
D RYING.
The waterseal or the oilless
metal in the Bellows
Assembly is worn out.
Replace Bellows Assembly.
PROBLEM CHECK POINT CAUSE SOLUTION
Are there impurities in
the Drain Strainer?
Impurities are obstructing
drainage.
Disassemble Pulsator
and take out impurities in
Drain strainer
YES
NO
Are there impurities in the
case valve or Inlet Joint.
Impurities are obstructing
drainage.
Remove impurities or
replace Case Valve or
inlet joint.
Impurities are blocking the
Drain Hose.
Remove impurities
YES
NO
DRAINAGE IS
NOT
SATISFACTORY.
Is the Drain Selector is
at the DRAIN position?
Misoperation Turn Drain Selector to
WASH/RINSE positon
YES
WATER KEEPS
DRAINING
DURING WASH
C o n c e r n i n g D r a i n a g e
There are impurities
between the Case Valve
and Valve Bellows.
Remove impurities.
Or replace Case Valve.
NO