Daewoo DV-K824DY, Инструкция по эксплуатации

Страница: 11 / 28

ENGLISH
9
Timer recording using G-CODE
c a s s e t t e s
R E C O R D I N G
◆
For timer recordings, clock, date, and stations
must be set correctly.
◆
Load a cassette with its safety tab in place
(see page 13) and with sufficient free space for
the recording.
◆
If you don’t have the G-CODE numbers see page 10 for the normal timer.
◆
If you have made a mistake , move back to the relevant position with the button and
change the setting.
◆
If there is no programme location displayed under “PR” in the change menu, the video
doesn’t yet know the location number for the programme you want. Type it in and this will be
stored for last recordings.
◆
For further timer information see page 11.
◆
Should programming overlap , you get a warning.
◆
To cancel this timer recording, press stop button more than 5 seconds.
◆
G-CODE is a trademark applied for by Gemstar Development Corp.. The G-CODE system is
manufactured under license from Gemstar Development Corporation.
Call the G-
CODE
menu.
From your TV magazine, type in the number next
to the programme you want to record ...
... and confirm.
Decide if you want to record "One Time", "Daily"
or "Weekly"...
... and confirm.
Switch your video off.
If you wish to make changes:
Move to the position you want to change using the
/
buttons.
Change the setting using the / or number buttons. If all
setting are ok, press o or k, till you see “OK confirm” in the
bottom line.
Confirm.
G-CODE
OK
OK
OK
PR
/
1 2 3
4 5 6
7
0
8 9
G-CODE
0-9:G-CODE number
:correct
OK:confirm MENU:end
G-CODE Number
83077----
TIMER PROGRAM (One Time)
PR 03
Start Time 21:20
End Time 22:20
Start Date 20/09(SAT)
Tape Speed SP
TIMER
How often do you want to
record this program?
/
:correct
OK:confirm MENU:end
PR+/-:select
OK:confirm MENU:end
One Time
Daily(MON-FRI)
Weekly(Once a Week)
DV-K824DY-HG/H_(¨£` )-‡»¿º 01.3.5 4:1 PM ˘ ` 9