Daewoo DV-K*04W Series, Руководство по обслуживанию, Страница: 49 / 114

No. NAME I/O ASSIGNMENT ACTIVE CN
1 IF ON(H) O RF MODE ‘H’ OUTPUT OTHERWISE ‘L’ OUTPUT H PIF
2 AUDIO MUTE(H) O AUDIO MUTE H OUTPUT H A/V 1CHIP
3 D. PWM O DRUM MOTOR CONTROL PWM OUTPUT P DECK(DRUM)
4 C. PWM O CAPSTAN MOTOR CONTROL PWM OUTPUT P DECK(CAP)
5 T REEL I TAKE-UP REEL PULSE INPUT P DECK(REEL)
6 S REEL I SUPPLY REEL PULSE INPUT P DECK(REEL)
7 MESECAM(H) I MESECAM MODE INPUT H A/V 1CHIP
8 V/SC DATA O VIDEO SERIAL DATA OUTPUT(I 2 C BUS) SERIAL A/V 1CHIP
9 V/SC CLK O VIDEO SERIAL CLK OUTPUT(I 2 C BUS) SERIAL A/V 1CHIP
10 Hi-Fi DET(H) I Hi-Fi DET. DATA INPUT H Hi-Fi
11 REMOCON IN I REMOCON DATA INPUT P REMOCON
RECEIVER
12 A. SW O Hi-Fi A. SWP OUTPUT P Hi-Fi/PRE-AMP
13 NC
14 Q V SYNC O PINOUT THIS SIGNAL DURING ‘TRICK’ MODES PULSE/L A/V 1CHIP
2HD:SW PULSE
15 C. ROTARY O 4HD:EXCLUSIVE OR OUTPUT OF HEAD AMP P A/V 1CHIP
SW & V. SW PULSE
TO SELECT SP H’D OR LP H’D
SP H’D:L LP H’D:H
• 4HD
16 HEAD AMP SW O P A/V 1CHIP/ PRE-AMP
17 ENVE COMP I COMPARE SP ENVE WITH SP ENVE P PRE-AMP
SP:L, LP:H
18 V. SW O TO SELECT R/L CHANNEL (VIDEO H’D) P PRE-AMP
19 NC
20 SLOW STEP O CONTROL SIGNAL TO PROTECT AGAINST P CTL AMP
CONTROL ABNORMAL ACTION DURING SLOW MODE
21 REC CTL O CTL PULSE OUT IN REC MODE P DECK(CTL)
22 CAP FG I CAPSTAN FG INPUT P DECK(CAP)
23 DRUM PG I DRUM PG INPUT P DECK(DRUM)
24 DRUM FG I DRUM FG INPUT P DECK(DRUM)
25 PB CTL I CTL PULSE INPUT P CTL AMP
26 VCC BACK UP 5V
µ-COM PORT 46
SECTION 6. µ-
COM PORT
IC 501 (168KKVZGTS)
PLAY CUE/REV
SP L P
LP H P
*P: Pulse, H: High, L: Low
A/D: A/D convert port, serial: serial Data/Clock