12
How to Connect with RF cable, Audio/Video jack
INPUT 1
ANT IN
INPUT 2
Rear Panel of DVD-VIDEO
Outside Antenna or
Wall Antenna Outlet
Rear Panel of TV
R
ANT.IN
RF OUT
L
OUT
IN
AUDIO
VIDEO
AUDIO/VIDEO CABLE
RF CABLE
1
1
Remove circular cable (RF cable) (surplus cable) plugged in “ANT.IN” Jack in rear panel of TV. Connect the cable
to “ANT.IN” jack in rear panel of DVD-Video.
2
2
Connect TV to DVD-Video. Connect “RF OUT” jack in DVD-Video with “ANT.IN” jack in TV with RF cable.
3
3
(If there is AUDIO/VIDEO INPUT jack in TV)
Connect VIDEO OUT jack in DVD-Video to VIDEO IN jack in TV, and AUDIO OUT jack in DVD-Video to
AUDIO IN jack in TV with connecting cable of Audio/Video jack.
Select VCR mode by pressing TV/INPUT button in TV, you can view more clear screen and sound than
connection with RF cable only.
■
In the initial SET, exclusive channel for video is set to CH 3. To change this setting, set again in “CHANNEL SET”
screen in VCR operation.
■
In connecting RF cable to TV, set TV channel to CH3.
Connecting with TV
• VHF: 2 ~13 channels of TV
• UHF: 14~69 channels of TV
• CATV: Broadcasting is transmitted with cable from broadcasting station by contract with the station and consumers. It does
not need any antenna.
• In/Out jack in Audio/Video terminal:
- In: A jack used to receive signal required in this unit from other units.
- Out: A jack used to send signal of this unit to other units.
• Connect with Audio/Video terminal, you can enjoy more clear video and audio.
(Use OUTPUT button in this REMOTE to select video mode.)
DV6T812N-LT(GB) 02.8.5 9:23 PM ˘
`
12