Daewoo DUB-2850DT, Инструкция по эксплуатации

Страница: 8 / 24

Remark: The side S-VIDEO jack (B9) and the VIDEO socket (B10) does not connect at the same time.
NORMAL
OK/SELECT GUIDE
5
CONNECTING EXTERNAL EQUIPMENT
The rear Scart1 (C1), Scart2 (C2) sockets, the front AV socket (B10) (B11 and B12), and the S-VHS socket (B9) are three dedicated sockets to
connect audio-video equipment.
Rear
REAR SCART 1 SOCKET (AV1)
This socket (C1) has video / audio inputs and outputs. Ouput is RF analogue signal.
It is recommended to connect to this socket automatic AV switching equipment
such as pay-TV decoders, video games, DVD players and most VCR’s.
In most cases, when connecting powered equipment to this socket, the TV
set switches automatically to AV mode. If not, then use the TV/AV buttons
(A4) or (B8) to select AV1.
REAR SCART 2 SOCKET (AV2)
This socket (C2) has video / audio inputs and outputs. Ouput is RF digital signal.
Automatic AV switching equipment(for example most VCR’s) can be connected to
this socket.
In most cases, when connecting powered equipment to this socket, the TV
set switches automatically to AV mode. If not, then use the TV/AV buttons
(A4) or (B8) to select AV2.
You can also receive an S-VHS signal with REAR SCART2 socket, by
selecting SVHS2 with the TV / AV buttons (A4) or (B8).
VCR / DVD / Video Game / Pay-TV decoder Important:
If your video equipment does not have SCART socket(s), or
if you wish to use only the aerial (RF) connection (not
recommended), then you should make use of PR 00 on the
TV set for best performance.
TV/AV SELECTION
Allows to switch between TV and external modes.
By repeatedly pressing the remote control TV / AV (A4) or the TV front panel TV /
AV (B8) button, the on-screen display is changed as shown (SVHS3 is an option):
AV1 AV2 SVHS2 AV3 SVHS3 TV
Remark: If the signal source from the rear SCART1 socket (AV1) is RGB
(e.g. normally from a DVD player) then AV1 RGB will be displayed.
SIDE AV SOCKET (AV3)
The side AV socket (B10) - (B11 and
B12) has audio and video inputs. To
switch from TV to these inputs,
use the TV / AV buttons (A4) or
(B8) and select AV3.
SIDE S-VIDEO JACK
The side S-VIDEO jack (B9) has video inputs only.
It is necessary to connect the audio inputs to socket (B11 and
B12) in order to have audio and video. To switch from TV to
these inputs, use the TV / AV buttons (A4) or (B8) and
select SVHS3.
Side
CAMCORDER
OR
VIDEO GAME
HEADPHONE SOCKET
To hear TV sound with
headphones, insert a
3.5mm headphone plug
into the headphone
socket (B13). The
speaker’s sound will be
automatically cut off.