7
SLEEP
By pressing the SLEEP button repeatedly, you can select one of the
following settings:
0 -> 30min. -> 60min. -> 90min. -> 120min. -> 0
The set will be turned off after time you select.
Automatic Switch-Off in No broadcast Signal
If a broadcasting signal is not present for about 30 minutes, the set will
be automatically turned off.
In AV mode, however, this function does not operate.
RECALL
The RECALL button is used to display the current status: programme
number, station name, clock.(left above) and system(right below)
This display appear for about 3 seconds unless any button is pressed.
CHILD LOCK
You can prevent the use of the TV set without the remote controller.
To activate CHILD LOCK function press MENU button and press the
TIME, MODE,
, POWER button in sequence with the remote controller
within 5 seconds. Then the TV set will be child-locked. The child-lock func-
tion is indicated by flickering the STAND-BY INDICATOR. The TV can be
switched back on only using the remote controller.
Note that if the WAKE UP TIMER is enabled, the set will be turned on
though child-locked.
MODE
Pressing the MODE button on the remote controller, the current system of
the set will be displayed on the screen.
Whenever you press the MODE button, the system will be changed as
following
AUTO -> PAL -> SEC -> N3 -> N4 -> N5
the red colour of OSD means that the colour system is in “AUTO” mode.
OSD MESH FUNCTION
If you push the RECALL key with the MENU displayed in the screen,
the OSD except text will be MESHed. If you want to return to the nor-
mal OSD press the RECALL key again.
16 : 9, ZOOM FUNCTION
Each time you press “SKIP” key except in “TEXT” and “EDIT” mode,
the size of the picture changes from normal 4:3 to 16:9, ZOOM, and
the original 4:3 in turn.