Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve
connected another component to your TV(such as a VCR) using the Video/Audio input, you will
want to be able to view the signal from the component.
To do this, you will need to switch from the ‘TV’ input to the ‘Line’ Input, as follows.
1
With the TV on, press the MENU button twice, then “Set-Up” menu will appear.
2
Use the
V
V
CH
W
W
buttons to select “Input”.
3
Press the
C
C
VOL
B
B
buttons to change from ‘TV’ to ‘Line1, Line2’.
4
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the
Video/Audio in jack on the front your TV, and your TV’s back panel at the same time, the for-
mer takes precedence of the latter.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
1
Select
Set-Up
Language : English
Input :
Line 1
Adjust
Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
14
Chapter 3: Operating Your TV
