8
Chapter 1 : Connecting an Antenna/Cable and VCR to Your TV
Connecting a VCR
After antenna cable connections are made, you are still required to connect the VCR using a
video/audio connecting cables for (stereo) playback of good quality from the VCR.
Note
: On many VCR’s, playing tapes causes the VCR’s TV/VCR switching to disconnect
the antenna signals from the TV. If you cannot select a certain channel, try pressing
the TV/VCR button on the remote control.
Note :
• When connecting a cable TV converter/decoder
Æ :
The unscrambled channels will come through the ANT-1 terminal whenever the antenna
input is set to the ANT 1 mode.
The scrambled channels from the decoder box will come through the VCR and the ANT-2
terminal whenever the antenna input is set to the ANT 2 mode. Select channel 3 or 4 on
your TV and VCR to match your converter’output channel.
• The cable
∫ connection is necessary only when the cable TV converter/decoder Æ is con-
nected.
Connecting Other Pieces of Equipment
You may want to connect a VCR, laser disc player, satellite receiver, or another type of
equipment to your TV. We recommend that you follow the instructions included with the
piece of equipment you wish to connect.
Safety Note
If you plan on being away from your home for an extended period of time, or if a thunder-
storm is approaching, you should unplug your television, and you may wish to disconnect
your TV from a rooftop or satellite antenna. You do not need to disconnect your TV from a
cable system.
ANT-1
Antenna
AUDIO
R OUT L
VIDEO
OUT
IN
OUT
ANT
VCR
or
Cable
Iead-in
