Daewoo DTQ 25G1FC, Инструкция по эксплуатации

Страница: 18 / 39

14
Chapter 3 : Operating Your TV
Programming Your TV’s Channel Memory
Your TV automatically memorizes the channels you can receive. Once channels are memorized, you
can scan through them using
W
CH
V
buttons on the remote control or on the TV.
SOURCE Selection
1. Press menu button on the remote control or
on the TV to display the main menu.
2. Press
W
CH
V
buttons on the remote control
or on the TV to select ‘Auto Program’ and
press
C VOL B buttons on the remote control
or on the TV.
3. Press W CH V buttons on the remote control
or on the TV to select ‘Source’ and press
C
VOL
B
buttons on the remote control or on
the TV. If you connected a antenna to your
TV, select ‘Air’, if you connected a cable
system, select ‘CABLE’.
Auto Programming Function
1. Select Auto Program following step 2 and 3
in “SOURCE selection” above.
2. Press C VOL B button an the remote control
or on the TV to start auto programming pro-
cess. The TV will automatically cycle
through all the TV or CABLE channels on
the mode selected by the Air/Cable mode,
and store active channels in the channel
memory
3. Press MENU button on the remote control or
on the TV repeatedly to exit on-screen menu when channel programming is completed. This pro-
cess takes a few minutes.
4. Even if you don’t press any button, the on-screen menu disappear after a few second.
TAND-BY CH VOL MENU
TAND-BY CH VOL MENU
AND-BY CH
VOL
MENU
AND-BY CH VOL MENU
L
Prev
WV
Move
CB
Select
Setup
Video
Audio
Timer
Function
1
L
Prev
WV
Select
CB
Adjust
Setup
Edit Program
Favorite Ch
Language
Captions
Power Restore
Input
Auto Program
CB
To Press
2
L
Prev
WV
Select
CB
Adjust
Auto Prog.
Auto Program
Source Air
3
L
Prev
WV
Select
CB
Adjust
Auto Prog.
Source
Auto Program
CB
To Program
2