Normally, your TV displays the signal coming through the antenna terminal. However, If you ve connected another
component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from
the component.
To do this, you will need to switch from the TV input to the Line Input, as follows.
With the TV on, press the MENU button twice, then set-up menu will appear.
Use the CH
buttons to select Input .
Press the VOL
buttons to change from TV to Line .
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the Video/Audio in jack on the
front your TV, and your TV s back panel at the same time, the former takes precedence of the latter.
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
1
Select
Set-Up
Language : English
Input :
Line
Adjust
Next
3
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
14
Operating Your TV