Daewoo DTQ-14Q1, Инструкция по эксплуатации

Страница: 13 / 31

Once you have connected your TV to an antenna or cable system, plugged the TV in,
and put batteries in the remote, you are ready to use the TV. The first thing you should
do is program your TV so it memorizes all of the available channels.
Turning Your TV On
1 To turn your TV on, press the POWER button on the remote
control. You can also use the POWER button on the front
panel. Make sure your TV is plugged in before you try to turn
it on.
Programming Your TV's Channel Memory
Your TV's memory determines the channels that are available using the
W
CH
V
but-
tons. If a channel is not in memory, you can tune to it with the number buttons, but not
with the
W
CH
V
buttons. Follow these steps to program your TV's memory:
1 With the TV turned on, press the MENU button.
2 Use the
W
CH
V
buttons to select Setup, and press the
C
VOL
B
buttons.
3 Use the
W
CH
V
buttons to select Auto Program, and press the
C
VOL
B
buttons.
4 Use the
W
CH
V
buttons to select Source, then use the
C
VOL
B
buttons to select
Air or Cable.
5 If you connected an antenna to your TV, select Air; if you connected a cable sys-
tem, select Cable.
6 Use the
W
CH
V
buttons to select Auto Program, and press the
C
VOL
B
buttons to
display Auto Program.
7 If you exit Auto Program, press the MENU button.
Your TV's channel memory will not be affected by a power outage. You will not need
to re-program the memory unless you change the type of cable antenna connected to
your TV.
Operating Your TV
11
Chapter 3 : Operating Your TV
C H A P T E R 3
1
1 3
Setup
Video
Timer
L
Prev
WV
Move
CB
Select
2
Setup
Video
Timer
L
Prev
WV
Move
CB
Select
4
Setup
Auto Program
CB
To Press
Edit Program
Favorite Ch
Language
Captions
Power Restore
Input
L
Prev
WV
Select
CB
Adjust