Daewoo DTQ-14P2FCM, Руководство по обслуживанию, Страница: 11 / 48

10
ALIGNMENT INSTRUCTIONS
4-3. Vertical Size Adjustment
•
Select “V.SIZE” item, adjust “V.SIZE” data value to proper vertical size as follows.
4) GEOMETRIC ADJUSTMENTS (S6)
•
Enter the service mode and select service adjustment S7.
•
Whenever you select the “S7” using the volume up or down button, the screen is changing like this.
•
Using the volume up or down button, select internal cross pattern.
•
Select service adjustment S6
•
You can see the OSD as shown in below.
4-1. Horizontal Position Adjustment
•
Select H.PHASE item, adjust H.PHASE data value to obtain proper horizontal centering of the
internal cross pattern at the left and right of the screen.
4-2. Vertical Position Adjustment
•
Select V.POSI item, adjust V.POSI data value to center the raster properly on thescreen.
GEOMETRY
H. PHASE 17
V. POSI 29
V. SIZE 80
NO SD POWER OFF YES
V SC 7
V LIN 18
MOVE ADJUST RECALL : SET
NORMAL BLACK WHITE100 WHITE60 CROSS