5.2. VSP 9412A
– Integrated Video Matrix switch
• Up to seven CVBS inputs, up to two Y/C inputs,
• Three CVBS outputs (Y/C inputs signals are com-
bined to CVBS output format)
• 9 bit amplitude resolution for CVBS, Y/C A/D con-
verter
• AGC (Automatic Gain Control)
– Multi-standard color decoder
• PAL/NTSC/SECAM including all substandards
• Automatic recognition of chroma standard
• Only one crystal necessary for all standards
– RGB-FBL or YUV-H-V input
• 8 bit amplitude resolution for RGB or YUV
• 8 bit amplitude resolution for FBL or H
– ITU656 support (version dependent, refer to next
chapter)
• ITU656 input/output
• DS656 output (double-scan ’656-like’ output)
– Letterbox detection
– Noise reduction
• Temporal noise reduction
• Field-based temporal noise reduction for lumi-
nance and chrominance
• Different motion detectors for luminance and
chrominance or identical
• Flexible programming of the temporal noise
reduction parameters
• Automatic measurement of the noise level
– Horizontal scaling of the 1f
H
signal
• Split-screen possible with additional PiP or Text
processor
– Flexible digital horizontal scaling of the 2f
H
signal
• Scaling factors: 3, ..., 0.75 including 16:9 compat-
ibility
• 5 zone panorama generator
– Embedded memory
• On-chip memory controller
• Embedded DRAM core for field memory
• SRAM for PAL/SECAM delay line
– Data format 4:2:2
– Flexible clock and synchronization concept
• Horizontal line-locked or free-running mode
• Vertical locked or free-running mode
– Scan-rate-conversion
• Simple interlaced modes (100/120 Hz): AABB,
AAAA, BBBB (9402A/9412A only)
• No scan-rate-conversion modes (50/60 Hz): AB,
AA, BB (9432A/9442A only)
– Flexible output sync controller
• Flexible positioning of the output signal
• Flexible programming of the output sync raster
• ’Blank signal’ generation
– Signal manipulations
• Still field
• Insertion of colored background
• Windowing
• Vertical chrominance shift for improved VCR pic-
ture quality
– Sharpness improvement
• Digital color transition improvement (DCTI)
• Peaking (luminance)
– Three D/A converters
• 9 bit amplitude resolution for Y, -(R-Y), -(B-Y) out-
put
• 72 MHz clock frequency
• Two-fold oversampling for Anti-imaging
• Simplification of external analog postfiltering
– 1920 active pixel/per line in default configuration
– I
2
C-bus control (400 kHz)
• selectable I
2
C address
– 1.8 V ± 5% and 3.3 V ± 5% supply voltages
– MQFP80B package
5
(1) Description
IC DESCRIPTION
APPENDIX
Содержание DTM-2881Z SERIES
