background image

5

Press the RIGHT button. 
Auto setup will begin, your stations will be located and stored.

Please wait until the Edit menu appears.
If you don’t want to edit programme now, escape from menu with the MENU
button. 
You can do it later.

The EDIT menu shows you information as follows: 

- Programme position  assignment : Progamme number and Station name,

Real channel number 

- Picture information : PAL, SECAM, SECAM-F 
- Sound informatin : B/G, L/L’, 

I

, D/K 

- Skip information : YES, NO 
NB:  Terrestrial transmissions in GREAT BRITAIN are PAL

I

.

I.E.  picture information is PAL. 

sound informatin : 

I.

DELETING THE  PROGRAMME  POSITIONS

Position the selection bar to programme number to delete with the
UP/DOWN buttons.
Note that you can move the selection bar  when the cursor is on the Pr ( pro-
gramme no. ).

Press the DELETE (Yellow) button.  

MOVING THE  PROGRAMME  POSITIONS 

Position the selection bar  to  programme number you want to move.    

Press the MOVE(Green)  button.  The  color of selection bar will be changed
in Purple from Blue. 

Position the new blue selection bar to new programme  number.

Press the MOVE(Green) button.

SKIPPING THE CHANNELS

Select  SKIP "YES" or "NO" with the SKIP (Red) button. You can also use
the UP/DOWN button after moving the cursor to Skip. 

The programme marked with SKIP "YES" is skipped when changing chan-
nel using the UP / DOWN button.  
A skipped programme number can be selected using the NUMBER button
0..9, will be displayed in Cyan.

ENTER  A STATION NAME 

Move the cursor to Name.
Then the Alphabet, Number and symbols will appear.

You can enter a station name with the UP / DOWN and LEFT/RIGHT but-
tons. 

PROGRAMME EDIT

Auto Setup                          C02         Pr01 

Please wait!

Position

Skip              

Cursor

Move

Return

Delete

M

Edit

Pr    

Name  Ch      Picture 

Sound  Skip

02       -----       C07      France     L/L’        No
03      -----       C11      SECAM   D/K        No
04      -----       C25      PAL         I            No
05      -----       C35      PAL         I            No
06      -----       C50      SECAM  D/K        Yes
07     -----       C50      SECAM   D/K        Yes

FR1--    C02    PAL         B/G   

No

01

Position

Skip              

Cursor

Move

Return

Delete

M

Edit

Pr    

Name  Ch      Picture 

Sound  Skip

02       -----       C07      France     L/L’        No
03      -----       C11      SECAM   D/K        No

05      -----       C35     PAL         I            No
06      -----       C50     SECAM 

D/K        Yes

07     -----       C50     SECAM   D/K        Yes

01     FR1--    C02    PAL         B/G   

No

-----       C25     PAL         I            No

04

Adjust

Skip              

Cursor

Move

Return

Delete

M

Edit

Pr    

Name 

Ch     

Picture 

Sound 

Skip

02       -----      

C07      France    

L/L’         No

03     

-----      

C11      SECAM  

D/K        No

04     

-----      

C25      PAL        

I           

No

05     

-----      

C35      PAL        

I           

No

06     

-----      

C50      SECAM 

D/K        Yes

07    

-----      

C50      SECAM  

D/K        Yes

01    

FR1--    C02   

PAL        

B/G   

No

ABCDEFGHIJKLMNOPQRST
-.

0  23456789

1

1

Содержание DTM-28 Series













Отзывы: