14
ENTERING/LEAVING TELETEXT MODE
- Select the desired program with teletext.
- Press the remote control TELETEXT (
) button (A22) to select teletext mode. The initial page
(or the last page viewed if you have already used teletext in the present channel) appears.
- Teletext And Teletext (TAT) function (OPTION): if you want to watch two teletext pages on
same screen, press the TELETEXT (
)button (A22) again. When entering into TAT mode, the
active teletext page is on the left hand part of the screen, at the base of the screen a menu
coloured page links is available. The passive page, on the left hand part, is locked to the ac-
tive page, usually it display the next page in the list.
Using the remote control RIGHT (A20) / LEFT (A7) buttons, you can change the active page.
For example, you can held the index page (press HOLD button (A9)); on one side of the screen
and change the active page to the other side for navigation.
- Picture And Teletext (PAT) function (OPTION) : If you want to watch the TV program and use
teletext at the same time, press the TELETEXT button (A22) again. Teletext will be displayed
on the right hand part of the screen, and the whole TV picture will be compressed into left
hand part of the screen.
- To return to TV mode, press again the TELETEXT (
) button (A22).
PAGE SELECTION
- You can directly enter the 3 figure page number by using the remote control NUMBER 0...9 buttons (A3).
- You can sequentially select teletext pages by pressing the remote control PAGE UP (A6) / DOWN (A21) buttons.
- At the base of the screen a menu of coloured page links is available, showing either page numbers or a title with headings (eg Sport, News) in RED, GREEN,
YELLOW or CYAN colour. These pages can be accessed by using the corresponding coloured buttons (A11, A12, A26, A25) on the remote control.
Once a request is made, the page number is shown in the extreme top left corner of the screen. If the requested page is not immediately available the
rolling header will be active until the page arrives.
TELETEXT