
Basic Operations
17
SYSTEM SETTING
V-MODE
(WHEN SELECTING INTERLACE, PROGRESSIVE, S-VIDEO or HD mode)
According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
In STOP mode, press SYSTEM button on the remote control, then choose TV TYPE.
SYSTEM
NTSC
PAL
AUTO
• When you press the [SYSTEM] button, the TV screen shows
the information as : “If you want to change, press
[SYSTEM] again.” Press the [SYSTEM] button again, the
video out system changes as follows.
There are variety of ways to connect the DVD player to your TV.
(refer to 14page)
Choose one of the following video output modes by pressing
[V-MODE] button, depending on the connection from DVD
player to your TV.
• Component connection - Progressive mode or Interlace mode
Check whether your TV has the function of progressive before selecting
progressive mode. If your TV does not accept the progressive, you can select
the Interlace mode.
• S-Video connection - S-video mode
• Composite connection - Interlace mode
• HDMI connection - HD mode (For more details, refer to 15page)
When video output mode is not proper for the connection, no picture or no
sound may occur.
V-MODE
DSW-800H(English)
2008.9.11
9:59
AM
˘
`
17