17
Input Select
INPUT
SELECT
• Select [Component 1 or Component 2] by
pressing INPUT SELECT button of
Remote Control or PDP unit.
• Each time you press INPUT SELECT
button, a different input mode appears. The
sequence is as follows: Component 1 -->
Component 2 --> Video 1 --> Video 2 -->
Computer.
Select a desired channel and
• Select a desired channel and function by
using the Remote Control of Digital
Broadcasting Receiver.
3
4
NOTES:
1) You can select INPUT SELECT while you are using OSD(Menu).
Sequence: [Menu] --> [Input] --> [Component 1 or 2 (DTV/DVD)]
2) Digital TV signals available: 1080i(60Hz), 720p(60Hz), 480p(60Hz)
3) Antenna Connection:
Apartment : Check if common antenna receives digital broadcasts.
Common Private Houses: Set the indoor/outdoor UHF antenna to the
direction of the digital broadcasting transmitting company.
4) For detailed connection method is referred to the Owner’s Manual of
Digital
π
ʺ Receiver.
5) Component? : Signal with which brightness and color signals are
separated, producing sharp screen.
6) If the Digital Broadcasting Receiver has PC Output terminal
(D-sub15pin), connect to ‘PC INPUT’ in the back panel of PDP.
When watching TV by PC Input, some signals may be seen at the top
and bottom area of the screen. In this case, select [Menu] --> [Screen]
--> [Vertical Size] to adjust.
Component1
PC
Component2
Video1
Video2
