Daewoo DSD-9230E, Инструкция по эксплуатации

Страница: 14 / 35

GENERAL VIEWING FUNCTION
14
D I G I T A L
The following describes the basic functions of your DSD-9230E while watching
satellite TV or listening to satellite radio.
If you select a channel to which you do not have access, you will get a message
on the screen. This message may vary, depending on type of program and
Service Provider. In the case of scrambled channel message, you can not watch
the program with DSD-9230E.
While viewing, the current channel information is shown on the bottom of the
screen when you press INFO key on the remote control.
There are many useful features in DSD-9230E for your convenience.
To change channel, use CH button on the
front panel or PR key on the remote
control. You can also directly enter the
channel number by using the numeric key on
the remote control.
In addition, DSD-9230E provides more
convenient channel change function.
While viewing, press OK key on the remote
control. Then channel list will be displayed on
the right side of the screen. When you press
EXIT key, the channel list will disappear.
Using PR or CH choose your
channel, which is highlighted in orange color.
Then press OK key to go to the selected
channel.
If there are a lot of channels listed, use
key on the remote control, then you can move
from page to page.
Note
: DSD-9230E is designed to search all
of free channels in the selected
satellite. So if you have installed DSD-
9230E for the first time, it shows only
free channel list.
Select Channel