Daewoo DSB-181LH, Руководство по обслуживанию

Страница: 43 / 55

41
1 INDOOR UNIT
PROCEDURES PHOTOS
1. Stop the Air conditioner and disconnect the power cord from the wall
outlet.
2. Removing the insert Grille and Frame.
!
Loosen three screws for fixing the the Insert Grille and Frame.
(Pull out the frame cap before loosening three screws) (Fig 1)
@
Loosen three screws at the Drain Pan.
#
Remove the Insert Grille and Frame.
3. Removing the Control Box.
After doing above procedures:
!
Disconnect indoor room and coil thermistors. (Fig 3)
@
Disconnect the fan motor lead wire from connection at the main
PCB. (Fig 3)
#
Disconnect the swing motor connection wire.
$
Loosen a screw for fixing ground wire.
%
Loosen two screws for fixing the body.
4. Removing the Drain Pan.
After doing above procedures:
!
Loosen a screw for fixing body. (Fig 4)
@
Unhook the right part of Drain Pan.
5. Removing the Indoor Coil.
After doing above procedures:
!
Loosen four screws for fixing indoor coil at left and right side. (Fig 5)
@
Loosen a screw for fixing the bracket tube at the back side. (Fig 6)
#
Remove the indoor coil. (Fig. 6-1)
6. Removing the fan motor.
After doing above procedures:
!
Loosen two screws for fixing holder moter at left and right side.
(Fig 7, 8)
@
Loosen a screw for fixing fan motor and blower.
#
Remove the fan motor.
9. DISASSEMBLY INSTRUCTIONS
Fig 2
Fig 1
Fig 3
Fig 4
Fig 5
Fig 6
Fig 6-1
¡
DSB-181LH