• 32 •
11.
FUNCTION SETTING
OSD LANG
•
ENGLISH
The OSD is in English.
•
CHINESE
The OSD is in Chinese.
SPDIF OUTPUT
• SPDIF/OFF: No signal is output from
the coaxial or optical port.
• SPDIF/SOURCE CODE: Select this
when the DVD player is connected with a
power amplifier through optical or
coaxial port, refer to page 10. When a
Dolby Digital DVD, DTS DVD or MPEG
DVD is played, the coaxial or optical
port will output in the corresponding
digital(Source code) format. The power
amplifier to be connected must have
Dolby Digital, DTS and MPEG
decoding.
• SPDIF/PCM: Select this when the DVD
player is connected with a 2-channel
digital mode or stereo amplifier (refer to
page 14 for the connection). When a
Dolby Digital or MPEG DVD is played,
the optical or coaxial port will output in
PCM 2-channel format.
CAPTIONS
• ON
The hidden subtitle is shown.
• OFF
The hidden subtitle is turned off.
SCREEN SAVER
Start the screen saver, the screen
saver image appears when the unit stops
or the image is frozen for a few seconds.
This saver can keep the screen from
being damaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
COMPRESSION >>
LINE OUT
DUAL MONO >>
DYNAMIC RNG
FRONT SPEAKER >>
MAIN PAGE
COMPRESSION
• LINE OUT: Compress input
signals linearly.
DUAL MONO
There is the output mode of the L and
R signals of the set audio output. If it is
set to "MIXED MONO", the function
only works when the DVD being played
is 5.1-channel.
DYNAMIC RNG
When the compression mode is set to
"LINE OUT", this is selected to adjust
linear compression rate to obtain the
different compression results of the
signals.
FRONT SPEAKER
• STEREO LT/RT
Select this when you play a disc with
Dolby Pro Logic stereo, the disc signals
can be decoded by the unit and reproduce
realistic theater effects in your room.
DOLBY DIGITAL SETUP
The setting structure is :
- -
DOLBY DIGITAL SETUP PAGE
- -
STEREO
LEFT
RIGHT
MIX
STEREO LT/RT
STEREO
Содержание DS-2000
Страница 37: ...DS ...