IMPORTANT
If the unit has not been used for a long period of time, the rechargeable battery may be
completely discharged into a “sleep mode” condition. This is the characteristics of all the
rechargeable battery. For the first time to recharge (to wake up) the battery, it is
recommended to charge for a period exceed 5 hours but not exceed 24 hours.
Power ON / Standby
1.
Press
Power
button once (over 3 seconds) to switch on the radio from the Standby mode.
2.
Press
Power
button again for back to the Standby mode.
Clock Setting:
1.
Check the radio is in Standby mode.
2.
Press
Time
set button
for 3 seconds on the front panel to start clock setting. The display for
hour is flashing.
3.
To set the hours, press
Next
or
Previous
buttons
while the display is still flashing.
4.
Press
Time
set button
on the front panel to minute setting.
5.
To set the minutes, press
Next
or
Previous
buttons
while the display is still flashing.
6.
Press
Time
set button
on the front panel to complete the clock setting.
Alarm Setting
1.
Check the Unit is in Standby mode.
2.
Press
AL
button for 3 seconds on the front panel to start alarm setting.
3.
To set the hours, press
Next
or
Previous
buttons
while the display is still flashing.
4.
Press
AL
button on the front panel to minute setting.
5.
To set the minutes, press
Next
or
Previous
buttons
while the display is still flashing.
6.
Press
AL
button on the front panel to wake-up sound setting.
7.
To set the wake-up sound, press
Next
or
Previous
buttons
while the display is still flashing.
(Buzzing sound -> Radio -> USB/SD)
8.
Press
AL
button on the front panel to wake-up sound volume setting.
9.
To set the sound volume, press
Next
or
Previous
buttons
while the display is still flashing.
(Default sound volume: level 15)
10.
Press
AL
button on the front panel to complete the alarm setting.
Remark: Press
AL
button to enable / disable the alarm function. To make sure the alarm icon
is switch on if alarm function is in using,
Sleep Function
1.
Press the
Sleep
Button to select a time. For example, when the LED display shows 15
minutes the radio turns on and then turns off automatically after 15 minutes.
2.
To select a longer playing time, press the
Sleep
button to select 15 / 30 / 45 / 60 / 75 / 90
minutes.
3.
To turn off the radio at any time, press the
Power
Button for a second.
Bluetooth Function
1
.
In power on mode, Press the
USB/SD/BT
button to select the Bluetooth function. The
display will shown "
bt
" in flashing.
2.
Activate the Bluetooth function in your Bluetooth device.
3.
Select “
DRP-121
” on your Bluetooth device for pairing. The speakers will have a pop sound
to confirm if you success connect with your Bluetooth device.
EN-2
