57
INPUT SIGNAL
• Used to select
INPUT signal of
external device
connected to the
PDP.
NOTES:
1) If an external device is not connected or INPUT signal is not
applied a Warning Message (“No Signal”) will be displayed.
2) In this case, check if external device is connected and/or
terminal connection is properly fitted.
3) Also, you can select input using [INPUT] button in the keypad
of the PDP unit. The sequence of selection is as follows:
TV -> AV1 -> AV2 -> Component1 -> Component2 ->
PC -> HDMI -> TV
Component 1
Selecting INPUT SIGNAL
Press the Input Signal Selecting Button.
• Press the [TV], [AV] and [MULTIMEDIA] button on
the remote control, or select the desire input signal
using Keypad of the PDP unit.
• Each time you press input mode buttons, a different input
mode appears. The sequence used is as follows:
1
Component1
Component2
HDMI
PC
AV(S)1
AV(S)2
TV
•
[MULTIMEDIA] button
• [AV] button
• [TV] button
