Daewoo DPN-4274NHS, Руководство по обслуживанию

Страница: 33 / 61

-32-
SERVICE MODE
9) MISC
(1) TST PTRN AT : Cycled patterns from R G B WH every 1 minute automatically.
(2) TST PTRN MA : Cycled patterns from BK WH R G B by pressing volume up key
(3) TV AT OFF : When in TV mode and no signal is detected for 30 min, the set is turned
off automatically.
10) INFOR : MICOM(firmware) version information
(year 4 digits, month 2 digits, date 2 digits and time 4 digits : e.g. 200409221030 )
11) RESET
(1) LEVEL 1: Reset all values (service mode & user menu).
(2) LEVEL 2: Reset all except PW181-1 values
(3) FACTORY: Reset user menu values
12) PANEL
(1) 50Hz Mode :
- STD1 : Standard Mode 1 (Peak Luminance 100%, False Contour Good)
- STD2: Standard Mode 2 (Peak Luminance 100%, False Contour Bad)
- HIQ1: High Image Quality Mode 1 (Peak Luminance 70%, False Contour Very Good)
- HIQ2: High Image Quality Mode 2 (Peak Luminance 70%, False Contour Good)
(2) 60Hz Mode :
- STD1: Standard Mode 1 (Peak Luminance 100%, False Contour Good)
- STD2: Standard Mode 2 (Peak Luminance 100%, False Contour Bad)
- HIQ1: High Image Quality Mode 1 (Peak Luminance 70%, False Contour Very Good)
- HIQ2: High Image Quality Mode 2 (Peak Luminance 70%, False Contour Good)
(3) Frame Conv :
- Off: Input Vsync Frequency = Panel Display Vsyinc Frequency
- On: Panel Display Vsync Frequency Fixed (=60Hz)
(4) Long Life : Safety Mode(Low Peak Luminance)
(5) GAMMA : Panel Inverse Gamma Correction
(6) ED : Panel Error Diffusion